• Manual or fixed focus
• TTL modulation up to 500 kHz
• Analog intensity control
• Optical output power up to 120 mW
• Wavelengths from 520 - 685 nm
• Industrial standard
• IP67
Machine Vision,Triangulation Sensors,High-Precision Positioning Tasks,3D-Measurement
System specifications
| Wavelength nm | 520 | 532 | 635-685 |
| Wavelength tolerance nm (typical) | -5~+10 | ± 1 | ±10 |
| Wavelength drift nm / K (typical) | 0.06 | 0.06 | 0.25 |
| Output power mW | ≤40 | ≤40 | ≤120 |
| Electronic versions | B3 | B | B, S3 |
| Pointing Stability μrad / °C | <15 | ||
| Long-term power stability (24h) | ±3 % over operating temperature range | ||
Electrical specifications
| Operating voltage | 5 ~ 30 VDC | ||
| Operating current (max. at 25°C) | <300 mA | <400 mA | |
| Protection | Over temperature protection and LED pre-failure indicator, reverse polarity and transient protection (ESD, burst & surge) | ||
| Electrical isolation | Potential-free housing | ||
| Connection | 4-pin M12 plug | ||
| Power consumption | <2.7 W | <2 W | |
Optical specifications
| Fan angles (1) Degrees | 10°, 20°, 30°, 45°, 60°, 75°, 90° (homogeneous lines) 5°, 10°, 15°, 20°, 30°, 90° (Gaussian line profile) 20°, 30°, 110° (raster lens for homogeneous line profile) |
||
| Line straightness (2) % (of line length) | <0.05 % | ||
| Line uniformity (3) % (typical) | <25 % | ||
| Dot | Point elliptical, point circular | ||
| DOE | Multi line, crosses, grids, circle with dot, etc. | ||
| Focus range mm | 100 mm up to 10.000 mm (or customized fixed focus available); ZM18-B-532 >200 mm |
||
注：
(1) Line length / fan angle: at >13,5 % lmax
(2) Line straightness: Deviation from best fit line over the middle 80% of the line, for homogeneous lines
(3) Line uniformity: Maximum relative optical power variation over the middle 80% of the line, for homogeneous lines and fixed focus
Electronic versions
| Available Wavelengths | 532 | 520 | 635, 640 | 640-685 |
| Digital modulation na na | na | na | <500 kHz | |
| Rise Time (Mod High => 90%) | na | na | <200 ns | |
| Fall Time (Mod Low => 10%) | na | na | <100 ns | |
| signal level | na | na | VIL_max: < +0,9 V VIH_min: > +2,7 V |
|
| max. voltage range | na | na | 0-30 VDC | |
| Analog modulation | na | na | <10 Hz | |
| active range | na | na | 0-1 VDC | |
| max. voltage range | na | na | 0-30 VDC | |
Environmental conditions
| Operating temperature (1) °C / °F | -10 °C to +50 °C / 14 °F to +122 °F |
| Storage temperature °C / °F | -40 °C to +85 °C / -40 °F to +185 °F |
| Humidity % | <90 %, non-condensing |
| Dissipated heat | <1 W |
Mechanical specifications
| B | B3 | S3 | |
| Weight g/lbs | 75 g 45 g / 0.1lbs (532nm) |
75 g / 0.17 lbs | 85 g / 0.19 lbs |
| Length mm / in | 108 mm / 4.25 in 136 mm (532nm) |
108 mm 4.25 in |
128 mm 5.04 in |
| Diameter head Ø mm / in | 20 mm / 0.79 in | ||
| Material | Aluminium | ||
| Protection class | IP67 | ||
M12 4-pin: A-Coding Male Connector
According to IEC 61076-2-101
- X 1.1： 5 - 30 VDC, 15 VA
- X 1.2： Digital modulation TTL (only S3)
- X 1.3： GND
Dimensions:
ZM18B Z M18B3
ZM18S3
ZM18B-532
