星期日, 29 09月 2024 17:34

Z-LASER model Z80M18S3-F-660-lp45

The products of the ZM18 series set the standard for modern laser modules for industrial use. You can select the right laser for your positioning application from more than 1,000 different variants.
The compact, sensor-like design enables easy integration into existing machines or systems. Easy-to-operate focussing optics complete the product. It’s the perfect allrounder!

Easy Installation,Output Power up to 120 mW,Shock Resistant,IP67,Different Wavelengths available
Highlights
• Manual or fixed focus
• TTL modulation up to 500 kHz
• Analog intensity control
• Optical output power up to 120 mW
• Wavelengths from 520 - 685 nm
• Industrial standard
• IP67


Machine Vision,Triangulation Sensors,High-Precision Positioning Tasks,3D-Measurement 

System specifications
Wavelength nm  520 532 635-685
Wavelength tolerance nm (typical)   -5~+10 ± 1  ±10
Wavelength drift nm / K (typical)  0.06 0.06 0.25
Output power mW  ≤40  ≤40  ≤120
Electronic versions  B3  B, S3
Pointing Stability μrad / °C  <15
Long-term power stability (24h)  ±3 % over operating temperature range

Electrical specifications
Operating voltage  5 ~ 30 VDC
Operating current (max. at 25°C) <300 mA  <400 mA
Protection  Over temperature protection and LED pre-failure indicator, reverse polarity and transient protection (ESD, burst & surge)
Electrical isolation  Potential-free housing
Connection  4-pin M12 plug
Power consumption <2.7 W  <2 W

Optical specifications
Fan angles (1) Degrees 10°, 20°, 30°, 45°, 60°, 75°, 90° (homogeneous lines)
5°, 10°, 15°, 20°, 30°, 90° (Gaussian line profile)
20°, 30°, 110° (raster lens for homogeneous line profile)
Line straightness (2) % (of line length)  <0.05 %
Line uniformity (3) % (typical)  <25 %
Dot  Point elliptical, point circular
DOE  Multi line, crosses, grids, circle with dot, etc.
Focus range mm  100 mm up to 10.000 mm (or customized fixed focus available);
ZM18-B-532 >200 mm 

注:
(1) Line length / fan angle: 
at >13,5 % lmax
(2) Line straightness: 
Deviation from best fit line over the middle 80% of the line, for homogeneous lines
(3) Line uniformity: 
Maximum relative optical power variation over the middle 80% of the line, for homogeneous lines and fixed focus

Electronic versions
Available Wavelengths  532 520 635, 640  640-685
Digital modulation na na  na na   <500 kHz
Rise Time (Mod High => 90%) na na   <200 ns
Fall Time (Mod Low => 10%) na na   <100 ns
signal level na na   VIL_max: < +0,9 V
VIH_min: > +2,7 V
max. voltage range na na   0-30 VDC
Analog modulation na na   <10 Hz
active range na na   0-1 VDC
max. voltage range na na 0-30 VDC

Environmental conditions
Operating temperature (1) °C / °F  -10 °C to +50 °C / 14 °F to +122 °F
Storage temperature °C / °F  -40 °C to +85 °C / -40 °F to +185 °F
Humidity %  <90 %, non-condensing
Dissipated heat  <1 W

Mechanical specifications
  B3  S3
Weight g/lbs  75 g
45 g / 0.1lbs (532nm)
75 g / 0.17 lbs 85 g / 0.19 lbs
Length mm / in  108 mm / 4.25 in
136 mm (532nm)
108 mm
4.25 in
128 mm
5.04 in
Diameter head Ø mm / in  20 mm / 0.79 in
Material  Aluminium
Protection class  IP67

M12 4-pin: A-Coding Male Connector

According to IEC 61076-2-101
  • X 1.1:  5 - 30 VDC, 15 VA
  • X 1.2: Digital modulation TTL (only S3)
  • X 1.3: GND

Dimensions:

ZM18B Z M18B3
ZM18B Z M18B3

ZM18S3
ZM18S3

ZM18B-532
ZM18B 532
查看 6098